Philco PHBM 7000 - Manual (Page 11)

9 Revison 06/2014 Copyright © 2014, Fast ČR, a. s.
EN
PART 6: MAINTENANCE AND CLEANING
Make sure to disconnect the supply cable from the wall outlet before cleaning.
1. Baking container: Clean on the outside and inside with cloth slightly dipped in water. Do not use any
abrasive or sharp object for cleaning. You may damaged the non-stick coating of the container. The baking
container must be completely dry before installation.
2. Kneading hook: As far as the kneading rod is concerned, it may be hard to remove. Fill the baking container
with water and let it sit for about 30 minutes. After 30 minutes, you should be able to remove the kneader
easily. Clean the hook carefully with soft, cotton cloth dipped in water. Please note that the baking container
and the kneading hook may be washed in dishwasher.
4. Lid and see-through viewer: Clean the lid on the inside using soft cloth dipped in water.
5. Cover: Carefully clean the outside of the cover with slightly wet cloth. Do not use abrasive materials or
solutions as they may damage the glossy fi nish of the cover. Never submerge the lid in water during
cleaning.
6. Before storing your bread maker, make sure that it is clean, cooled down, dry and make sure the lid is
closed.