Posiflex JIVA KS-7215 - Manual (Page 10)

Part 10
INSTALLING UPS BATTERY (OPTION) For Gen 6 Base
The optional UPS battery is delivered in the carton if
it is ordered. For slim base model, please refer to the
left picture and place the UPS battery in the cavity in
base with the rectangular marked end first. Route the
battery connection cable together with all other
external connection cables through the arrow marked
passage to the battery connector on the main unit. If
the optional cable clip is available, insert it into a
hole marked in circle in the picture and use it to hold
the battery cable. The UPS battery will be held in place when the bottom plate
is screwed back. As for Gen 6 super slim base model, please remove the UPS
battery bracket on bottom of the stand assembly instead of the bottom plate as
in the right picture.
CABLE PASSAGE FROM BOTTOM For Gen 6 SLIM Base
Please route all cables through the cable passage to main unit in desktop mount
application. Pull the compress lock to open the back cover of base stand. Hold
them together with a cable tie. Pass all cables through the cable exit to external
connections.
OPENING STAND ASSEMBLY For Gen 5 Base
Take the adjustable stand assembly and turn it up side
down to show the bottom of the base. Remove the
bottom plate fixing screws in rubber feet to open the
bottom plate as in the picture at the right.
The inside of an example base will look like the
picture below with numbered items listed. However,
there could be some variation to the contents inside
depending on what option items actually installed.
Fixing Screws
Base bottom