Posiflex JIVA KS-7215 - Manual (Page 14)

Part 14
appropriate external devices through the cable exit at the bottom of stand
assembly. Please make sure that each connector has to be connected to the
right device in the right way.
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and jack
that is considered as an artificial destruction and is not
covered by the warranty.
WALL MOUNTING
The wall mount model is delivered without any base
but with a wall mount kit. Please follow the installation
guide that comes with the wall mount bracket to fix the
wall mount bracket on wall and then hang the main unit
with the matching pegs into the matching holes on wall
mount bracket.
Please note that since there is no base for the wall mount
model there can be no base installed device nor base
mount kit. The area required for wall mount application is
determined by the main unit dimensions and is 378 mm in
width and 312 mm in height.
UPGRADE WALL MOUNT KIT
There is an upgrade wall mount kit coded as SK-200 that supports an omni-
directional Laser bar code scanner as a derivation from the basic wall mount
bracket WB-6000VB. With this kit, the Laser scanner is installed under the KS
system. Please follow the instructions that come with this kit to install and to
utilize it.
OPERATING SYSTEM RECOVERY
For KS systems with operating system in the CF card once the CF card is
damaged, a bootable new CF card will be required to have the workstation
back to work. Please follow instructions given by the System Integrator to
deal with such situations.
For KS systems preloaded with Windows XP Pro / WEPOS / POS Ready/ Win
7 on HDD, Posiflex provides recovery DVD delivered with the touch terminal
for the preloaded operating system. The System Integrator shall take care of
software restoration after OS recovered. A Posiflex supplied USB interface
COMBO drive will be required for such action. Other brand CDROM drive
may require its own driver different from what supported in the recovery DVD.
WB-6000VB