Quintum Technologies Tenor DX - Manual (Page 39)

3-4 P/N 480-0049-00-10
Chapter 3: Installation
Figure 3-1 Rack Installation (Front View)
Wall Mount
There are two mounting brackets available to mount the unit to the wall.
Pre-installation Guidelines
• Ensure the wall is level and stable.
• Do not attach the unit to a temporary wall.
• Ensure the wall mounting area is within cord distance of the power outlet.
Required Materials
• 2 wall mounting brackets (including 2 screws)
• Drill
• 3/16 drill bit
• Measuring tape or ruler
• Hammer
• Phillips head screwdriver
Rack
Mounting
Holes
Tenor DX