Install ground safety cable (if required), Install ground safety cable (if required) -10, Install ground safety cable – Quintum Technologies Tenor DX User Manual
Page 45
3-10
P/N 480-0049-00-10
Chapter 3: Installation
Install Ground Safety Cable (if required)
The Tenor DX provides an Earth Ground screw (a #6 screw). This screw provides earth ground to the unit if
the AC power receptacle you are plugging into does not contain a ground prong (the Quintum supplied power
cable has a three prong connector). To provide ground via the grounding screw, you will need to connect the
grounding screw to a Ground Safety Cable, which can then be connected to an approved safety earth ground.
Connect the Ground Safety Cable as follows:
1. Unscrew the existing screw from the grounding hole.
2. Place the screw through the ring connector at one end of the ground safety cable.
3. Attach the screw securely to the threaded grounding hole.
4. Connect the other end of the ground safety cable to an approved electrically grounded object. Consult with
a licensed electrician if you are unclear about this operation.
Figure 3-8 Install Ground Safety Cable