Quintum Technologies CDR - Manual (Page 10)

Quintum Tenor CMS CDR Page 8
CDR Field Definitions: Extended Format Fields
Includes all Standard Format Fields plus the following.
** For a given IP call, Local Call ID of one Tenor should match the Remote Call ID of the other.
The reason that the sequence number and the Local Call IDs are usually the same, but not always the same,
is that the sequence number is generated at the end of the call when the CDR is output, and the Call IDs are
generated at the start of the call.
R null Auto Switch Duration The number of seconds that the AutoSwitch call
was active. Valid entry: time in seconds.
S 0 Bad IP Quality Events The number of bad quality events that occur
during a VoIP call. This number determines the
overall quality of a call.
T 0 Auto Switch Flag The terminating side of the AutoSwitch call initially
terminates to the internal AutoSwitch agent before
the call is actually autoswitched. This termination
generates an extra CDR in addition to the original
call that is autoswitched. This field identifies a call
that is terminated to the AutoSwitch agent. 0 =
normal call, 1 = termination to the AutoSwitch
agent.
Table 4: Extended Format - Settings 1 & 101
ID Sample Setting Field Name Definition
U 14155551000 Calling Party Number The Number called from. The format will be
delivered in whatever format the PSTN (Trunk-
Side) or PBX (Line-Side) delivers to the Tenor. It
will not necessarily be in International format.
V 12345678901234 PIN Code PIN Code entered. 14 digits maximum. This field
will be blank if a PIN is not configured.
W 0123456789 Local Call ID # Unique identification number, generated by the
local-side Tenor, for call record matching
purposes. Generated for all calls. **
X 9876543210 Remote Call ID # Unique identification number, generated by the
remote-side Tenor, for call record matching
purposes. Only generated for IP calls. **
Table 3: Standard Format Fields - Settings 0 & 100
ID Sample Setting Field Name Definition