Quintum Technologies CDR - Manual (Page 8)

Quintum Tenor CMS CDR Page 6
CDR Field Definitions: Standard Format Fields
Table 3: Standard Format Fields - Settings 0 & 100
ID Sample Setting Field Name Definition
A 1 CDR Sequence
Number Sequence number. This is a unique number
assigned to identify an individual call (i.e, 1, 2,
3,…). The sequence number starts from 1 and
wraps around at 4,294,967,295. When a Tenor
resets, the sequence number starts from 1 again.
If the system has a problem and loses
connectivity, the CDR server can send the Tenor
the last Call ID that it received. Tenor will reply with
all records that contain a Call ID, which is greater
than the one last received.
B 17325551212 Called number The number called. This will be in international
format except for pass-through calls going from
Line-Side to the Trunk-Side or from Trunk-Side to
the Line-Side.
C 15 Duration (seconds) This value is in seconds. The value will be 0 if
never connected.
D 20000207062812 Call Initiated date/
time The date and time the call initiated in the format of
yyyymmddhhmmss. The time will be the local time
configured on the Tenor. yyyy (4 digits for year),
mm (2 digits for month), dd (2 digits for day), hh (2
digits for hour), mm (2 digits for minutes), ss (2
digits for seconds).
E 21060207062815 Call Connected date/
time The date and time the call was actually connected
in the format yyyymmddhhmmss. The time will be
the local time configured on the Tenor. yyyy (4
digits for year), mm (2 digits for month), dd (2
digits for day), hh (2 digits for hour), mm (2 digits
for minutes), ss (2 digits for seconds). This field
will be blank if the call never connected.
F 20000207062830 Call Disconnected
date/time The date and time the call disconnected in the
format yyyymmddhhmmss. The time will be the
local time configured on the Tenor. yyyy (4 digits
for year), mm (2 digits for month), dd (2 digits for
day), hh (2 digits for hour), mm (2 digits for
minutes), ss (2 digits for seconds).
G 16 Disconnect Cause
Code The Q.931 cause value assigned if the call is not
connected. Possible common entries are listed in
the Cause Code list
below. This field will be blank
if the call was connected.