DeLorme Earthmate GPS PN-30 - Manual (Page 32)

30 The Find Page
 To clear all fields into which you have entered
information, go to MENU > Clear All Fields.
To view the search method you are using
Go to Find > MENU. The available options are preceded
by "Switch to..." and the device is set to the option that is
not showing. To change the search method, select
the method you want to use.
Searching for a Location
To search for a location, press Find at any time.
The search begins, using the current search criteria.
 You can change the search method.
 You can use additional search parameters, when
available, to narrow your search.
 "Searching >>>" displays as the device searches
for locations.
 At any time, press the arrow keypad to stop
the search process.
 If the search process is stopped, select Continue
Search to keep searching.
Show
The Show field is the primary search category. You can
select the following Show options; below each option
is a list of information you can change to improve your
search results:
 All
State/Country/City/Name (Find by Name only)
 Recent Finds–Shows the ten most recent
search results.
 Draw Layers (appears only if you have draw layers
on the device)
Name (Find by Name only)
 GIS Layers (appears only if you have GIS layers
on the device)
Name (Find by Name only)
 Waypoints (from the current file)
Symbol
Name (Find by Name only)
 Geocaches (from the current file)
Symbol
Name (Find by Name only)
 Points of Interest
Category
State/Country/City/Name (Find by Name only)
 Natural Features
Category
State/Country/City/Name (Find by Name only)
 DeLorme Atlas & Gazetteer Points
Category