Document Outline

• CONTENT
• 1. Introduction
  • Chapter Structure
  • How to Use This Manual
  • Terms and Definitions
  • System Overview
  • Application Questions
• 2. Hardware Orientation
  • In This Chapter
  • VENUS X1 Back Panel
    • CONT Interface
      • 4: Dial Switch
      • 5: 10/100M UDP Interface
      • 6: USB Interface
      • 7: RS232 Interface
    • INPUT Interface
      • 10: HDMI Input
      • 11: CVBS Input
      • 12: VGA Input
      • 13: DVI Input
    • OUTPUT Interface
      • 8.17: Sending Card Interface
      • 14: DVI/DVI LOOP Output
      • 15: DVI Output
      • 16: VGA Output
    • Optional Module
    • 1. 2. 3: S. V. D. C. U. H and Audio Optional Module
    • Switch and Power
      • 9. 18: Power Interface and Switch
    • Interface Protection Block
  • VENUS X1 Front Panel
    • OLED Panel
    • Menu Button
    • Signal Buttons
    • Function
• 3. Hardware Installation
  • In This Chapter
  • Safety Precautions
  • Unpacking and Inspection
  • Site Preparation
• 4. Menu Orientation
  • In This Chapter
  • MENU
    • INPUT
    • OUTPUT
    • PICTURE
    • SPLIT
    • TRANSITION
    • SCALE
    • SAVE SETUP
    • SYSTEM
    • LANGUAGE
    • FACTORY RESET
  • QUICK MENU
  • SPECIAL EFFECTS SWITCHING
  • SAVE FUNCTION
  • LOAD FUNCTION
  • PIP FUNCTION
  • SPLIT FUNCTION
  • SCALE FUNCTION
• 5. Communication Software Guideline
  • In This Chapter
  • Software Installation
  • Software Operation
    • Connection
    • Use
      • File Toolbar
      • Communication Toolbar
      • Device Toolbar
      • Output Resolution Toolbar
      • Display Mode Toolbar
      • Layout Toolbar
      • Aspect Ratio Toolbar
      • Signal Input Toolbar
      • Screen Parameter Toolbar
      • Image Toolbar
      • Display Toolbar
      • Output Toolbar
      • Images Display Toolbar
      • User Mode Toolbar
      • Log Toolbar
      • Information Toolbar
      • Control
      • Language
      • Admin
      • Help
  • How to Connect Window Control Program by RS232 Interface
  • How to Connect Windows Control Program by USB Interface
  • How to Connect Windows Control Program by LAN Interface
• 6. System Setup and Operations
  • In This Chapter
  • Interface and Input Signal Option
  • How to Realize Single Image Switching
  • How to Set up the PIP
  • How to Set up the SPLIT
  • How to Set the Size and Position of the Single Image
  • How to Choose and Custom Output Resolution
  • How to Realize the Screen Size Setting
  • How to Zoom the Image
  • How to Realize the Text Overlay Setting
  • How to User Define the BLACK Key
  • How to User Define the SCALE Key
  • How to Use Black Out
  • How to Realize LAN Remote Control Settings
  • How to Save the Parameter
  • How to Load the Saved Parameter
• 7. Common Questions and Solutions
  • In This Chapter
  • Input Jitter for I System of HDMI
    • Change the Input as P System
    • Connect the HDMI Signal to the EXT_HDMI Input
  • DVI Quick Split Operation
    • It Needs Signal Distributor if Split by DVI Port
    • Split by the HDMI Loop Out Port of EXT_9
    • Quick Split
  • There is Flash Point when Output to the LED Screen
    • Change the DVI Cable
    • Change the DVI Output Port
  • APP Software cannot Properly Connected in Mobile Phone or Tablet Computer
    • Confirm if Open the Ethernet Function
    • Confirm if IP Conflict for Mobile Phone, Wireless Router and Device
  • VGA Input Offset or cannot be Full Size Shown
    • Set Auto Adjust for VGA Input
  • HDMI, DVI Input Offset or cannot be Full Size Shown
    • Manual Adjust the HDMI, DVI and EXT HDMI, EXT DVI
  • Software Upgrade Failed
    • Can’t Open the Device
    • Failed when Upgrade Less than 100%
• A. Specification
• B. Contact Information
• C. Software Upgrade
• D. Optional Module Installation and
• Replacement Instruction