Scotsman C1448 - Manual (Page 17)

C1448, C1848 D
Air and Water Cooled User Manual
December 2014
Page 16
Switches
The two switches – on and off - can be accessed from
the front of the machine.
• To switch the machine OFF, push and release the
Off button. The machine will shut off at the end of
the next cycle.
• To switch the machine ON, push and release the
On button. The machine will go through a start up
process and then resume ice making.
Control Options
There are two optional, field installed controls that can
be on this machine.
• Vari-Smart (KVS) Adjustable ice level control
• Smart-Board (KSBU) Advanced Feature control
Adjustable ice level control
When this option is present there is an adjustment
post and an additional indicator light to the right of the
four indicator lights mentioned above. The ultrasonic
ice level control allows the use to control the point that
the ice machine will stop making ice before the bin or
dispenser is full. Reasons for this include:
• Seasonal changes in ice used
• Planning to sanitize the bin
• Faster turnover for fresher ice
• Certain dispenser applications where maximum ice
level is not desired
Use of control
Vari-Smart Control Area
There are several positions the ice level can be set
to, including Off (knob and label indicators lined up),
where it fills the bin until the standard bin control shuts
the machine off. See the kit’s instructions for complete
details.
Rotate the adjustment post to the desired ice level.
The machine will fill up to that level and when it shuts
off the indicator light next to the adjustment post will
be On.
Note: Ice will build up in the bin at an angle, the
distances listed above will be from the sensor to the
top of the ice directly beneath it. The actual distance
between the highest point of the ice may be closer or
further away, depending upon the angle of the ice.
Adjust Ice Level
Bin
Full
No
rm L
ow
er
02-4294-01
Graphic Rev. B
Rotate knob to set ice level
Yellow Arrow = Max Ice
White Arrow = Min Ice
Left Green = Dispenser high
Norm = Lower in Dispenser
Power
Status
Water
De-Scale
On
Off