Scotsman CSW45 - Manual (Page 4)

Electrical & Leveling
Before you move your ice maker into its final
location, it is important to make sure you have the
proper electrical connection:
A 115 Volt, 60 Hz., AC only 15 ampere electrical
supply, properly grounded in accordance with the
National Electrical Code and local codes and
ordinances, is required.
It is recommended that a separate circuit, serving
only your ice maker, be provided. Use a receptacle
which cannot be turned off by a switch or pull chain.
Recommended Grounding Method
For your personal safety, this appliance must be
grounded. This appliance is equipped with a power
supply cord having a 3 prong grounding plug. To
minimize possible shock hazard, the cord must be
plugged into a mating, 3 prong, grounding-type wall
receptacle, grounded in accordance with the
National Electrical Code and local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility of the
customer to have a properly grounded, 3 prong wall
receptacle installed by a qualified electrician.
Leveling the Ice Maker
It is important for the ice maker to be level in order to
work properly. Depending upon where you install the
ice maker, you may need to make several
adjustments to level it.
Tools required
• Carpenter’s level
• Adjustable wrench
• 1
4
" socket wrench
Undercounter Installation
If you are installing the ice maker under a
countertop, then you may need to adjust the height
of the ice maker. The adjustable rear wheels are
preset to position 1 for a cabinet opening height of
34" (86.4 cm).
1. For cutout height of 34" (86.4 cm)
2. For cutout height of 34
1
8
" (86.7 cm)
3. For cutout height of 34
5
16
" (87.2 cm)
4. For cutout height of 34
1
2
" (87.6 cm)
July 1999
Page 4
CSW45
1
2
3
4
Electrical Shock Hazard
Plug into a grounded 3
prong outlet.
Failure to follow these
instructions can result in
death, fire, or electrical
shock.
Do not use an extension
cord.
Do not use an adapter.
Do not remove ground
prong.