Sensoray 2444 - Manual (Page 14)

ssw
Syntax:
ssw <out> <in>
Connect matrix switch output out (1-4) to input in (1-4).
gsw
Syntax:
gsw <out>
Get the input connected to output out (1-4). Returns 1-4.
gcd
Syntax:
gcd <in>
Get carrier detection status for input in . Returns 1 for carrier detected, 0
otherwise.
sx3g
Syntax:
sx3g <in> <val>
Set extended 3G mode for input in (1-4) to on ( val = 1) or off( val = 0).
gx3g
Syntax:
gx3g <in>
Get extended 3G mode for input in (1-4). Returns 1 (on), or 0 (off).
sla
Syntax:
sla <in> <val>
Set launch amplitude for selected input in (1-4) to one of the following values
( val ): 0 – default, 1 - +50%, 2 - +100%.
14