Sensoray 2444 - Manual (Page 4)

Introduction
Model 2444 is a 4x4 matrix (crosspoint) switch designed to operate with SDI signals
from 125 Mbps to 2.97 Gbps. It supports SMPTE 259M(C) (SD-SDI), 292M (HD-SDI), and
424M (3G-SDI) serial digital video standards. The switch allows connecting any of the
four inputs to any of the four outputs. Embedded audio is passed along with the video
signal.
Control of the switch is performed with the front panel button interface or using
Ethernet or a serial communications link (RS-422/RS-485). A Web page interface is
available for easy control and configuration of the switch. The same functionality is
available via a simple command line interface over Ethernet (Telnet) or serial
communications link.
LED displays on the front panel provide indication of current connections and input
carrier detect status.
Network settings (IP address, ports) can be changed via the Web page interface to
accommodate various network configurations.
All settings, including the last switch configuration, are stored in non-volatile memory
and restored after power up.
4