Soundtube LA880i - Manual (Page 4)

2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
1. Unpack speaker. 3. Attach Allen Products
MM-024 speaker adapter plate
(available separately) to to rear
of speaker using supplied bolts.
See Allen Products installation
manual for more details.
4. Attach Allen Products
MM-020x mounting plate/pole
(available separately) to ceiling.
Use hardware with sufficient
strength to reliably hold the
speaker.
5. Attach speaker with Allen
Products speaker adapter plate
to mounting plate/pole.
6. Attach included safety cable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the end of the cable into
the SpeakOn input connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 | 800.64 7.TUBE | www.soundtube.com Ceiling Mount Instructions