Studio Technologies 76DA V.4.00 - Manual (Page 29)

Model 76DA/77 User Guide Issue 3, July 2012
Studio Technologies, Inc. Page 29
for Surround
Configuration—Sync Source, Sync Input Termination,
Audio-Synced-to-Video Sample Rate, and Digital Monitor
Output Types
Default: Sync source is L/R of currently selected input.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Pre-fader surround/stereo input C direct digital monitor output type AES3 (110 ohms/5 Vpp).
Post-fader surround/stereo digital monitor output type AES3 (110 ohms/5 Vpp).
Use the Channel Solo C and LFE buttons
to select the pre-fader surround/stereo
input C direct digital monitor output
type. Use the buttons to change the
configuration. C LED lit means AES3id
(75 ohms/1 Vpp); LFE LED lit means
AES3 (110 ohms/5 Vpp).
Use the level control to adjust the audio-
synced-to-video sample rate. Available
sample rates are 32, 44.1, 48, 88.2, 96,
176.4, and 192 kHz.
This LED displays the configuration
of the sync input termination. LED
not lit means sync input is not termi-
nated; LED lit means terminated with
75 ohms. Use the button to change
the configuration.
Use the Channel Solo LS and RS
buttons to select the post-fader sur-
round/stereo digital monitor out-
put type. Use the buttons to change
the configuration. LS LED lit means
AES3id (75 ohms/1 Vpp); RS LED lit
means AES (110 ohms/5 Vpp).
Use these buttons
to select the sync
source.
LED Surround B
lit means sync
input, video;
LED Stereo A lit
means sync input,
DARS;
LED Stereo B lit
means sync input,
word clock;
LED Stereo C
lit means L/R of
currently selected
input.
Press and hold
the Stereo to
Mono button
to display and
select the sync
source, sync in-
put termination,
audio-synced-
to-video-sample
rate, and digital
monitor output
types.
