Studio Technologies 76DA V.4.00 - Manual (Page 33)

Model 76DA/77 User Guide Issue 3, July 2012
Studio Technologies, Inc. Page 33
for Surround
Configuration—Surround to Stereo Downmix Levels and
Pre-Fader Surround Digital Monitor Output Mode
Default: L and R channel level change 0 dB when surround to stereo downmix function active.
LS and RS channel level change –3 dB when surround to stereo downmix function active.
C channel level change –6 dB when surround to stereo downmix function active.
LFE level change full attenuation when surround to stereo downmix function active.
Pre-fader surround digital monitor outputs pre-downmix.
Use this button to select the
level change for the LFE
channel when the surround
to stereo downmix function
is active. LED not lit means
full attenuation; LED lit means
–6 dB.
Press and hold
the Surround to
Stereo button
to display and
confirm the sur-
round to stereo
downmix levels
and pre-fader
surround digital
monitor output
mode.

These LEDs display the configuration of the
pre-fader surround digital monitor output
mode. LED L lit means output channels are
pre-downmix; LED R lit means output chan-
nels are post-downmix. Use the buttons to
change the configuration.
Use these buttons
to select the level
change for the left
and right channels
when the surround
to stereo downmix
function is active.
LED Surround A
lit means 0 dB;
LED Surround B
lit means –3 dB.
Use these buttons
to select the level
change for the left
surround and right
surround channels
when the surround
to stereo downmix
function is active.
LED Stereo A
lit means –3 dB;
LED Stereo B
lit means –6 dB.
Use these buttons to select
the level change for the
center channel when the
surround to stereo down-
mix function is active.
LED LS lit means –3 dB;
LED RS lit means –6 dB.