Studio Technologies 76DA V.4.00 - Manual (Page 36)

Issue 3, July 2012 Model 76DA/77 User Guide
Page 36 Studio Technologies, Inc.
for Surround
Press and hold both the Surround/Stereo and Dim buttons for 5 seconds
to restore Model 77 factory defaults. Once defaults have been restored,
the associated LEDs will light. After the buttons are released, configura-
tion mode will be exited and normal operation will resume.
Configuration—Restore Factory Defaults
Factory Defaults:
Device address A1.
Stereo input C sample rate converter enabled.
Post-fader stereo digital and analog monitor outputs can
be enabled.
Surround output bass management bypassed.
Stereo output bass management bypassed.
Bass management low-pass filter slope 24 dB/octave.
Bass management high-pass filter slope 24 dB/octave.
Mute/solo pre bass management mode.
Sync source is L/R of currently selected input.
Sync input terminated.
Audio-synced-to-video sample rate 48 kHz.
Pre-fader surround/stereo input C direct digital monitor
output type AES3 (110 ohms/5 Vpp).
Post-fader surround/stereo digital monitor output type
AES3 (110 ohms/5 Vpp).
Reference level set for –60.0 dB post-fader monitor
output level.
Attenuation display mode selected.

Warning: Each Model 77 unit must have a unique address. Restoring factory defaults will reset only this specific
Model 77 to device address A1. If another connected unit is already configured for address A1, normal system
operation will stop.
Note: The 5-second button-press delay is a safety feature ensuring that the factory defaults will not be accidently
restored.
85.0 dB SPL reference level.
Auto reference level off disabled.
–20 dB dim level.
Remote mute all enabled.
Remote dim enabled.
Input delay 0 ms.
L and R channel level change 0 dB when surround to
stereo downmix function active.
LS and RS channel level change –3 dB when surround to
stereo downmix function active.
C channel level change –6 dB when surround to stereo
downmix function active.
LFE level change full attenuation when surround to stereo
downmix function active.
Pre-fader surround digital monitor outputs pre-downmix.
6.0 dB channel pop solo up offset level.
–6.0 dB channel pop solo down offset level.
0.0 dB post-fader surround monitor output level offsets.
0.0 dB post-fader stereo monitor output level offsets.