Sundance SMT407 - Manual (Page 19)

Version 1.0.0 Page 19 of 38 SMT407 User Manual
SHBs
SHB Connectors
The SMT407 includes two 60-pin connectors to provide SHB communication to the
outside world.
The connector is referenced on the PCB by J3 and JA3 (See Figure 10: SMT407
Components placement-Top view and See Figure 11: SMT407 Components
placement-Bottom view).
All 60 pins of each SHB connector are routed to the FPGA in all available
configurations of SMT407.
Pin2
Integ
ral G
roun
d pla
ne
Pin 1
Alig
nm
ent
Pin
Blad
e an
d Be
am D
esig
n
0.5
mm
Figure 6: SHB Connector
Features:
High-speed socket strip: QSH-030-01-L-D-A-K on the SMT407, mates with
QTH-030-01-L-D-A-K
QTH are used for cable assembly or PCB connecting 2 PMCs.
Centreline: 0.5mm (0.0197”)
QSH Connector
An adapter is available for Agilent probes for the 16760A Logic Analyser.
The 2 probes supported are the E5378A 100-pin Single-ended Probe and the
E5386A Half Channel Adapter with E5378A.