TE Technology TC-24-12 - Manual (Page 3)

3
Features
ƒ Input voltage from (10.8 to 26.4) volts DC
ƒ Maximum 11.9 amps output current
ƒ Proportional-Integral (PI) control
ƒ Bi-directional, solid-state H-bridge operation, for heating and cooling
applications
ƒ Pulse-width modulation of output at 1000 Hz
ƒ Control temperature of –20 °C to +100 °C using MP-2379 thermistor
(supplied with the controller)
ƒ Control stability of up to ±0.3 °C (when controlling a cold plate)
ƒ Proportional (P) bandwidth adjustment of 1.0 °C to 15.0 °C and Integral (I)
rate adjustment of 0 to 2.55 repeats per minute
ƒ Removable terminal strip for easy connection of power, cooler, and
thermistors
ƒ Test points for reading Set Temperature, P, I, and thermistor voltages
ƒ Temperature status LEDs
ƒ Two inputs for optional, over-temperature thermistors or thermostats
ƒ Over-temperature alarm (with alarm output transistor) configurable for
continuous shutdown or automatic resetting of output power
ƒ Fault detection indications through the LEDs
ƒ Operating temperature range: 0 to 60 °C
ƒ Storage temperature range: -55 to 105 °C