Output-related settings, Setting the terminals for online output, Setting the terminals for monitor output – Teac CD-601MKII User Manual

Page 22: Setting stereo/monaural, Setting the output level

Advertising
background image

22

TASCAM CD-601MKII

OUTPUT-RELATED SETTINGS

Setting the Terminals for Online

Output

The BALANCED analog output terminal and AES/EBU
digital output terminal are basically provided as terminals
for online output. In the default setting, both of the monitor
playback signals and online playback signals are output
from these terminals. However, by using menu item No. 02
(“ON LINE”) you can set so that only the online playback
signal is output from these output terminals.

OFF (default setting):

Audio signals are output from the BALANCED analog output
terminal and AES/EBU digital output terminal during both
online playback and monitor playback.

ON:

Audio signals are output from the BALANCED analog output
terminal and AES/EBU digital output terminal only during
online playback.

Setting the Terminals for Monitor

Output

The UNBALANCED analog output terminal and SPDIF
digital output terminal are basically provided as terminals
for monitor output. In the default setting, both of the monitor
playback signals and online playback signals are output
from these terminals. However, by using menu item No.
03 (“MONI”) you can set so that only the monitor playback
signal is output from these output terminals.

OFF (default setting):

Audio signals are output from the UNBALANCED analog
output terminal and SPDIF digital output terminal during
both online playback and monitor playback.

ON:

Audio signals are output from the UNBALANCED analog
output terminal and SPDIF digital output terminal only during
monitor playback.

[

NOTE

]

• The playback signal is output from the PHONES terminal

during both monitor playback and online playback
regardless of the above setting.

Setting Stereo/Monaural

The playback output signal can be set to monaural.

Set monaural using menu No. 8 (“OUTPUT”).

Selection: ST (STEREO, default setting), MON (MONO)

Setting the Output Level

You can select the maximum output level of the BALANCED
analog output terminal.

Set the maximum output level using menu No. 09 (“OUT_L”).

Selection: +24 (default setting), +22, +20, +15 (dBu)

CD-601MKII_Eng.indd 22

3/26/2005 7:39:53 PM

Advertising