Teac SR-LUXi - Manual (Page 11)

11
Setting the Clock
1 Press and hold the CLOCK ADJ button on the
back for more than 3 seconds.
Release it when “12 H” or “24 H” blinks on the display.
< When the power is first turned on, the display
brightness is at the lowest setting. To make it
brighter, press the DIMMER button.
< If you do not press a button for 8 seconds, the clock
setting will end automatically.
If you want to change the hour mode, press a
VOLUME button (+ or −).
< When set to 12-hour mode, appears following PM
times. Nothing appears with AM times.
2 Press the CLOCK ADJ button again.
The “hour” value blinks.
3 Press a VOLUME button (+ or −) repeatedly to
set the current hour, and then press the CLOCK
ADJ button.
4 Press a VOLUME button (+ or −) repeatedly to
set the current minute, and then press the
CLOCK ADJ button.
Setting the clock is now completed and the clock
starts from the 00 seconds.
Setting daylight saving time
To change the clock for daylight
saving time, set the DST switch to
ON.
Hold down
more than 3 sec.