Using the light – Teac SR-LUXi User Manual
Page 20
Advertising
20
Using the Light
Turning the light on/off
Press the light control on the side of the unit.
< The power of the light and the audio section are
separate. You can use the light even if the audio
section is in standby (off).
< The light gradually becomes brighter or dimmer
over a few seconds after the control is pushed.
< You can use the LIGHT button ( ) on the remote
control unit to turn on/off the light.
Adjusting the brightness
Turn the control on the side of the unit.
< Turn it right to make the light brighter and to the
left to make it dimmer.
< You can use the LIGHT buttons (+ or −) on the
remote control unit to adjust the brightness.
Adjusting the angle of the light
Turn the light angle control next to the light.
Advertising