Teac UD-301 - Manual (Page 9)

9
A
Analog audio output jacks
Use these to output two channels of analog
audio. Connect the XLR jacks or RCA jacks to a
stereo amplifier or powered speakers.
Use commercially-available cables.
XLR: Balanced XLR cables
RCA: RCA audio cables
Connect the R jack of this unit to the right (R)
jack of the amplifier and the L jack of this unit to
the left (L) jack of the amplifier.
B
USB input port
Connect to the USB port of a computer to input
digital audio from it.
Use a commercially-available USB cable.
o When using a Windows computer, you must
install the dedicated driver on it before con-
necting it to this unit (see page 12). When
using a Macintosh computer, you do not
need to install a driver.
C
Output level switch (LEVEL)
Set the audio level output from the analog
audio output jacks.
FIX:
The maximum volume level is always
output. Use this setting when you want
to adjust the volume using a connected
amplifier. Audio will be output from the
analog audio output jacks even when
headphones are connected.
VARI: Output can be adjusted by the VOLUME
knob on the front of the unit. Use this
setting when you want to adjust the
volume using this unit. Audio will not
be output from the analog audio out-
put jacks when headphones are
connected.
OFF: Audio is never output from the analog
audio output jacks.
o Regardless of the LEVEL setting, the
VOLUME knob on the front of the unit
always adjusts the headphones output level.
D
Maintenance connector (UPDATE)
This connector is only for maintenance use.
Unless directed by our service department, do
not connect anything to it.
E
Digital audio input connectors
Input digital audio. Connect to the digital audio
output connectors of digital audio output
devices.
COAXIAL: RCA digital coaxial cable
OPTICAL: Optical digital cable (TOS)
F
Power cord connector
Connect the supplied power cord to the power
cord receptacle.
After all other connections are complete, con-
nect the power cord's plug to a wall outlet.
V Do not use any power cord other than the
one included with this unit. Use of other
power cords could result in fire or electric
shock. Unplug the power cord when you
are not going to use the unit for several
weeks.