Teac RC-HS20PD v.A - Manual (Page 7)

TASCAM RC-HS20PD
7
Using a commercially-available
cable
Under ordinary circumstances, use the dedicated
connection cable (5 m) that is included with the unit.
If the included dedicated cable is not long enough or
there is some other problem, use a commercially-available
category 6 LAN cable with straight wiring. When doing so,
however, make certain that the cable meets the following
requirements.
Always use a shielded cable. •
The maximum cable length is 10 m. •
Moreover, you must make the following enhancement to
the cable that you use.
1 Remove the ferrite cores (2) that are attached to
the connection cable included with the unit, and
attach them to both ends of the cable that is to be
used.
2 Tie the included bands to the cable near the ends
of the ferrite cores so that the cores do not move
away from the ends of the cable.
2 – Names and Functions of Parts