Teac US-100 - Manual (Page 21)

TASCAM US-100
21
Input and output ratings
MIC IN XLR connector
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 2.2 kΩ or more
Nominal input level: –62 dBu to –23 dBu
Maximum input level: –7 dBu
MIC IN TRS connector
Connector: 6.3 mm (1/4”) standard TRS jack (Tip: HOT,
Ring: COLD, Sleeve: GND)
Input impedance: 2.2 kΩ or more
Nominal input level: –62 dBu to –23 dBu
Maximum input level: –7 dBu
INPUT connectors (LINE mode)
Connectors: RCA pin jack
Input impedance: 10 kΩ
Nominal input level: –10 dBV (
INPUT knob minimized)
Maximum input level: +6 dBV
INPUT connectors (PHONO mode)
Connectors: RCA pin jack
Input impedance: 47 kΩ
Nominal input level: –50 dBV (
INPUT knob minimized)
Maximum input level: –34 dBV
GUITAR IN connector
Connector: 6.3 mm (1/4”) standard jack
Input impedance: 1 MΩ
Maximum input level: +3 dBV
OUTPUT connectors
Connectors: RCA pin jack
Output impedance: 200 Ω
Maximum output level: 0 dBV
PHONES connector
Connector: 3.5 mm stereo mini jack
Maximum output: 15 mW + 15 mW or more (32 Ω load,
THD+N 0.1% or less)
USB connector
Connector: USB B type 4 pin
Formats: USB 2.0 Hi-speed (480 MHz)
USB 2.0 Full-speed (12 MHz USB 1.1 equivalent)
Audio performance
Frequency response (MIC IN to OUTPUT)
20 Hz to 20 kHz, +1/-2 dB
Noise level (MIC IN to OUTPUT, when direct monitoring)
–90 dB
(Input: 150Ω terminated,
INPUT knob minimized, BALANCE
knob INPUT , OUTPUT level: FS-10dB, A-weighted)
6 – Specifications