Teac DR-05 V.2.00 - Manual (Page 8)

8
TASCAM DR-05
8
TASCAM DR-05
Home Screen
This is the screen that is usually shown when the unit is
stopped.
1 Playback speed setting status
One of the following icons appears according to the
playback speed setting.
Icon Playback speed
×1.0
×1.1 – ×1.5
×0.5 – ×0.9
Playback speed not controllable
2 Loop/repeat playback status
: Single playback
: Single track repeat playback
: All track repeat playback
: Loop playback
3 Monitor Mix function status
: Monitor Mix off
: Monitor Mix on
4 Effect on/off status
This icon shows whether the effect is on or off.
: built-in effect off
: built-in effect on
5 Power supply status
When a battery is being used, a battery icon shows the
amount of battery power remaining in bars ( , ,
).
The battery is almost dead and the power will soon turn
off if the icon has no bars .
When using a TASCAM PS-P515U AC adapter (sold
separately) or USB bus power, appears.
6 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
8 Stopped
9 Paused
7 Playing back
, Searching forward
m Searching backward
/ Skipping forward
. Skipping backward
7 Level meter
These show the levels of the input and playback signals.
When the Monitor Mix function is ON, the level of the
combined input and playback sounds is shown.
8 File information
The file name or tag information of the file currently being
played back is shown.
9 Playback position
The current playback position is shown by a bar.
0 Elapsed time
Shows the elapsed time (hours: minutes: seconds) of the
currently playing track.
q Remaining time
Shows the remaining playback time of the current track
(hours: minutes: seconds).
w Peak value in decibels (dB)
The maximum level that occurs in a fixed period of time is
displayed digitally.
e Monitoring output
: Signal output from headphones
: Signal output from the built-in speaker
r Playback area
This shows the current playback file area.
ALL All files in the MUSIC folder
FOLDER All files in the selected folder
P.LIST All files added to the playlist
t Loop playback IN (starting) and OUT (ending) points
The set starting and ending points of the loop are shown.
When the IN point is set, the icon appears at the corre-
sponding position.
When the OUT point is set, the icon appears at the
corresponding position.
y Playback file number/total number of files
The total number of files in the playback area and the
number of the current file are shown.