Setting and monitoring the output level – Teac KS-T2000 User Manual

Page 18

Advertising
background image

Kamesan KS-T2000

18

The gain level for all types of microphone ranges from –30 to –
70 dBs (marked in white; the –40 and –50 points are marked for
convenience), and the gain level for line-level sources ranges from
–20 to +4 dBm (marked in blue).

The head and mixer amps of the Kamesan KS-T2000 allow con-
siderable leeway. On the input stage, there is about 28 dB avail-
able, and on the output stage, about 17 dB is available

To help you match the levels of the Kamesan KS-T2000 with the
recorder connected to the outputs, the mixer is fitted with an in-
tegral 1 kHz line-up oscillator.

In order to see the output level using the oscillator:
1. Make sure that both the OUTPUT level switches are set to the

correct value (usually +4).

2. Turn the power on (up), and then turn the oscillator switch

on (up).

3. To monitor both channels together, set the monitoring selec-

tion switch to the L/R setting (see “Monitoring” on page 16
for an explanation of the monitoring switch settings).

4. Adjust the level of the outputs so that the VU meter reads

0 dB.

5. Remember to turn the oscillator off when the adjustment

has been made.

Setting and monitoring the
output level

Advertising