Teac KS-T2000 - Manual (Page 6)

Kamesan KS-T2000
6
The Kamesan KS-T2000 is supplied with everything you need to
start work.
However, you can purchase the following, in order to increase
the capabilities and the functionality of the unit:
• Power adaptors: you can use the Kamesan PS-M12 mini
power supply.
• Spare battery holders, allowing you to slip in a new power
source at a moment’s notice.
The Kamesan KS-T2000 case is designed to hold and protect the
unit against any wear and tear under the standard conditions of
use for which the mixer is designed. In addition, the mixer itself
has been designed to be rugged and to stand up to the demands
that will be made of it in its expected life.
Even so, you should not drop the mixer, or subject it to violent
shocks or vibration. Always keep the mixer in its case to avoid
any possible damage.
If you remove the mixer from the case, and then replace it, al-
ways make sure the case clip fits over the lip at the top of the
mixer front panel.
The touch fasteners at either side may be used to tidy cables, as
well as to restrain the mixer in its case.
You can use the side pocket in the case to store spare batteries,
adaptors, etc.
You can secure the top flap using the touch fastener when it is
folded back to allow operation of the front panel.
Accessories, etc.
About the case