Teletronics EZMesh - Manual (Page 25)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Mesh ID
The Mesh ID is a unique identification for a mesh network. Only MeshAP Access Points
with the same Mesh ID will be able to associate with each other on the mesh network.
Step 6. Replace the default Mesh ID with a preferred name.
Note: MeshAP Stations MUST have the same Mesh ID to be able to associate with each
other and to be managed by the Mesh Manager unit.
Step 7. Update Station Name. (Station Name is NOT required, it is recommended for easy
identification of each Station.) The Station Name will appear on the Mesh
Manager’s topology page.
Step 8. Update Station Location. (Station Location is NOT required, it is recommended
for easy identification of each Station.)
Step 9. Click "Save Settings and Apply" to confirm changes.
Step 6
Step 7
Step 8
Step 9
TELETRONICS INTERNATIONAL, INC. - 21 -