Teletronics EZMesh - Manual (Page 48)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Chapter 12
Firmware Upgrade
Direct Upgrade – Mesh Station
Step 1. Login to the MeshAP Access Point.
Step 2. Go to the Status link under the AP section, and check the current firmware
version/build date.
Step 3. Go to Administration: Firmware Update link,
Enter a Temporary IP for firmware update. The IP must be reachable from the
network.
Click on “Enable” to temporary enable to IP for the unit
IMPORTANT: Once the temporary IP has assigned the unit will prompt for re-login.
Follow the Login prompt to login with username/password.
TELETRONICS INTERNATIONAL, INC. - 44 -