Teletronics EZMesh - Manual (Page 33)

User Guide - EZMesh Full Duplex Mesh Network Access Point
Chapter 9
Setup Mesh Wireless (Backhaul)
Step 1. Login to the MeshAP Access Point.
Note: To access a MeshAP Access Point on the mesh network, login to the Mesh Manager
unit, and access the Topology page to locate the MeshAP Access Point unit needing
configuration.
Step 2. Go to the Wireless page under the MESH section.
Step 3. Select the Auto Assign or User Assign for the wireless backhaul
Note: the Channels shown on the interface may vary base on country of regulation.
The image captured above is based on the US version.
TELETRONICS INTERNATIONAL, INC. - 29 -