Thinklogical Q-Series SDI 3G Dual Link Exchange Module Manual - Manual (Page 4)

S D I 3 G / D u a l L i n k E x c h a n g e M o d u l e P r o d u c t M a n u a l , R e v . B Page 4
PREFACE
Conventions Used in this Manual
Throughout this manual you will notice certain conventions that bring your attention to important
information. These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point symbol,
as shown here.
A note is meant to call the reader’s attention to helpful information at a point in the text that is relevant to
the subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red
stop sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is relevant
to the subject being discussed.
1. Introduction
1.1. Product Overview
Conveniently convert a dual link SDI signal to a 3G SDI signal over a single-link, or
convert one 3G SDI signal to a dual-link signal in a single unit.
The Thinklogical SDI 3G/Dual Link Exchange is a compact broadcast quality, SDI converter. The system
allows the user to seamlessly convert a 3G SDI signal to a pair of Dual Link SDI signals, or vice versa,
with or without embedded audio and data. All other outputs, HD-SDI and SD-SDI are bypassed to the
outputs without conversion. Not only does the SDI 3G/Dual Link Exchange convert video signals in real-
time, it also provides the highest quality images for professional audio-visual and broadcast end users.