Thinklogical Q-Series SDI 3G Dual Link Exchange Module Manual - Manual (Page 8)

S D I 3 G / D u a l L i n k E x c h a n g e M o d u l e P r o d u c t M a n u a l , R e v . B Page 8
5. FPGA Downloads
Upgrades are available through Thinklogical.
For technical assistance, please call us at 1-203-647-8700.
To update a Module’s functionality in a Q-4300 or Q-2300 Chassis, go to the chassis front panel and
select Allow FPGA Update under the *System menu and load the update through the front panel USB
port using the FPGA Update.
FPGA Download Procedure: (Also see the Q-4300 FPGA Upgrade Procedure, Appendix A, pg. 13)
Firmware files and revision numbers are stored in the following:
http://ftp.thinklogical.com/ftp/visualization/updates/
Then select FPGA_firmware.zip
The FPGA_Download.exe application & instructions are stored in:
http://ftp.thinklogical.com/ftp/visualization/updates/FPGA_upgrade.zip
FPGA Update Preparation:
1. Retrieve the Firmware files/revision numbers and the FPGA_Download application
/instructions and place them in an accessible directory in your CPU.
2. Copy the file FPGA_firmware.zip to a local directory and extract to a desired location.
3. Copy the file FPGA_upgrade.zip to a local directory.
4. Open the FPGA_upgrade.zip file and install the application files sent to the card stored in
FPGA_firmware.zip.
6. Regulatory and Safety Compliance
6.1. Symbols Found on Our Products
Markings and labels on our products follow industry-standard conventions. Regulatory markings
found on our products comply with all domestic and many international requirements.
6.2. Regulatory Compliance
Thinklogical Extender products are designed and made in the USA and have been tested by a
nationally recognized testing laboratory. Each of our products complies with the following
standards (domestic USA and many international locations).
6.2.1. North America
These products comply with the following standards:
Safety
• ANSI/UL60950-1: 1 st Edition (2003)
• CAN/CSA C22.2 No. 60950-1-03
Electromagnetic Interference
• FCC CFR47, Part 15, Class A
• Industry Canada ICES-003 Issue 2, Revision 1
6.2.2. Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take corrective measures.