Tri Tool 236B Single Point User Manual
Page 8
8
TRI TOOL INC.
92-1333 : Rev. 110404
The slide assembly has infinitely variable bevel angle adjustments between 0 and
37 1/2°.
The 236B SP has a total radial travel of 26.30” (668.0 mm) and adjustment for large
pipe and flange cutting ranges.
IN SPECIFIC
Range, Beveling
15.00" (381.0 mm) diameter to 60.00" (1524.0 mm)
diameter cutting range at 37 1/2°
Bevel Angles
0° to 37 1/2° graduated bevel angle adjustment.
Range, Flange Facing
20.00" (508.0 mm) diameter to 68.00" (1727.2 mm)
diameter cutting range.
Feed Travel
5.0” (127.0 mm) nominal (radial).
Alignment
When used in conjunction with the 236B Miter
Mandrel Head:
Angular - ± 5°
Off set - ± .19” (4.83 mm)
Feed
Eight (8) selectable positions between .006”
(.152 mm) rev. and .042” (1.07 mm) rev. inclusive
Cutting:
.200 max. cut depth/pass.
63 RMS finish may be obtained depending on
material.
Spiral grooves as coarse as 31 grooves per inch
when grooving.
Machines stainless and carbon.