Verilink PRISM 3010 Dual DSX-1 (34-00250.2) Product Manual - Manual (Page 7)

1
I
NSTALLATION
Introduction This chapter contains information and instructions required to prepare the Verilink
3010 -300 for use. Included are initial inspection procedures, installation
instructions, configuration guidelines, and connection information.
The Dual DSX requires the PRISM 3030 and 3060 to have software revision 2.5 or
greater. Contact Verilink Inside Sales for software upgrade, if needed.
Safety Summary This manual contains information and warnings which must be followed by the
user to ensure safe operation and to retain the equipment in a safe condition.
WARNING: This sign denotes a potential hazard to the operator. It calls attention to a
procedure or practice which, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a WARNING sign until the indicated conditions
are fully understood and met.
CAUTION: Option modules are susceptible to damage caused by static electricity.
Use ESD (electrostatic device) precautionary measures, such as wearing static
grounding straps and storing modules in the supplied antistatic bags.
Unpacking
and
Inspection This unit is carefully packaged to prevent damage in shipment. Upon receipt,
inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, notify the carrier immediately and make a notation on the
delivery receipt that the container was damaged (if possible, obtain the signature
and name of the person making delivery). Retain the packaging material until the
contents of the shipment have been checked for completeness and the instrument
has been checked both mechanically and electrically.
If the contents of the shipment are incomplete or, if there is mechanical damage or
defect, notify Verilink. If the shipping container is also damaged, or the cushioning
material shows signs of stress, notify the carrier of the damage as well as Verilink.
Keep the shipping materials for carrier’s inspection. Verilink will arrange for repair
or replacement without waiting for claim settlement.
Supplied
Materials For specific applications, the user may require additional cables and adapters for
the installation and operation of the unit. The interface requirements of any
application may be met by using the appropriate cable. Standard cables and
Verilink ordering numbers are listed in Ordering Numbers on page iv. Contact
Verilink for any needed assistance in cable selection.
✍