Dbu dial string, Initialization string, Disconnection string – Verilink PRISM 4001 (34-00244) Product Manual User Manual

Page 32: Reset string 1-5, Summary screen, Figure 4-16 summary, Current column, Saved column, Switches column, Summary screen -12

Advertising
background image

4-12 Terminal Operation

PRISM 4001

CALLBACK ORIGINATE and CALLBACK ANSWER
units for them to connect.

DBU D

IAL

S

TRING

Used to enter the telephone number (up to 30 characters) the
4001 calls. This is a don't care field when the Dial Backup
Mode is ANSWER.

I

NITIALIZATION

S

TRING

Enter the modem initialization string (up to 30 characters)
here. See the modem documentation for further information.
The default setting is AT&F.

D

ISCONNECTION

S

TRING

Identifies the character string (up to 30 characters) to be out-
put when the modem session is terminated. The default set-
ting is ATH0.

R

ESET

S

TRING

1-5

Used for additional initialization commands, and are sent in the
event of a DBU failure. In order to reduce the average DBU
connection time, they are not sent at every DBU attempt.

Consult the DBU device manual for further commands.

Summary Screen

The Summary screen (Figure 4-16) is a display-only screen
which summarizes configuration settings in three columns:

C

URRENT

C

OLUMN

The Current column shows the settings the 4001 is currently
running.

S

AVED

C

OLUMN

The Saved shows the settings saved in the Flash EEPROM.

S

WITCHES

C

OLUMN

The Switches column shows the actual DIP switch posi-
tions.

SUPV Baud Rate, NMS Baud Rate, Unit ID, and Boot
modes are switch settings only and do not appear in the
saved column on the Summary Screen.

4001 DDS x.xx/x.xx

PRISM 4001

Local Screen

4001 DDS x.xx/x.xx

Unit Address: X

------------------------------- SUMMARY

--------------------------------

Configuration Item

Current

Saved

Switches

Other Information

------------------

-------

-----

--------

-----------------

DTE Baud Rate:

57.6K

57.6K

56K

Serial Num: 000054

Line Baud Rate:

64K

64K

56K

Port Type: RS232D

Line Clk Source:

INT

INT

NET

Loop Mode:

BIDIR

BIDIR

BIDIR

RTS Delay Norm/Dbl:

NORMAL

NORMAL

NORMAL

RTS/CTS Norm/On:

NORMAL

NORMAL

NORMAL

Data Mode:

TXPORT

TXPORT

STANDARD

DTE Sync/Async:

ASYNC

ASYNC

SYNC

DBU Rate:

57.6K

57.6K

57.6K

DBU Enable:

DISABLE

DISABLE

DISABLE

Supv Baud Rate:

19.2K

-----

19.2K

NMS Baud Rate:

19.2K

-----

19.2K

Unit ID:

3

---

3

Boot Mode:

SAVED

-----

SAVED

-----------------------------------MESSAGES-----------------------------

Figure 4-16 Summary

Advertising