Visara iCON-XT Installation - Manual (Page 19)

Chapter 2. Chassis Description and Installation Instructions
707097-001 2-7
Procedures
1. In the package, locate a pair of front (short) and rear (long) brackets. Please
note that the brackets are marked with Up/Front Arrows (front) and Up/Rear
arrows (rear).
2. Secure the front (short) bracket (marked with the Up/Front arrows) to the outer
rail with two Type G screws.
3. Locate the two buttons on the outer rail and attach the rear (long) bracket to it
by sliding the opening of the rear rail through the button.
4. Measure the depth of your rack and adjust the length of the rails accordingly.
5. Repeat the same steps install the other outer rail on the chassis.
6. Secure both outer rail assemblies to the rack with Type H screws and Type I
Washers.
2
3
G