Visara iCON-XT Installation - Manual (Page 24)

3-2 707097-001
ICON-XT Server - Installation and Maintenance Manual
Removing the Top Cover of the Server Chassis
Before installing any components, replacing chassis fans or accessing the motherboard,
you will first need to remove the top cover.
Procedures
1. Unlock and remove the screws and fasteners to remove the cover or components.
2. Save all the screws and fasteners for later use. (If necessary, label these screws or
fasteners for easy identification.)
3. Press the release tabs to release the cover from its locking position.
2
1
2. Once the top cover is released from its locking position, push the cover toward the
rear side and slide it out from the chassis.