Function 32 – load program, Function 33 – delete program, Function 34 – print program – Watson-Marlow PF6 User Manual
Page 21: Function 46 – language, Instruction handbook
INSTRUCTION HANDBOOK
PF6
PF6 IH EN 74-105-022 v1.04.doc
Version: 1.04
Page 21 of 30
It is important that all parameters are entered and that these parameters are checked before saving
the program saved via Function 31.
The system will always suggest the first available number in a range between 1 and 5.
If this number is to be accepted as the program number, press <ENT>, and all parameters will be
saved under this program number.
If another number is required, enter the number chosen, and if this number is free, the program is
saved by pressing <ENT>.
If the number is occupied by a program already saved, user is asked whether to overwrite the
program already saved.
Function 32 – Load program
Loads a program already saved and overwrites the current parameters with the values of the
program.
By pressing the required program number followed by <ENT>, the operating parameters saved under
the specified program number will be entered as the current parameters under the respective
functions.
If program number 0 is selected, the function is left without loading a program and the system will
keep the current values.
Function 33 – Delete program
If a complete program is to be deleted, this can be done by overwriting it via Function 31, or the
program can be deleted via Function 33.
When pressing the required program number followed by <ENT> the specified program will be
deleted.
If a number is entered under which no program is saved, the system will not accept it and the number
must be corrected, or the function can be left by pressing <0>+<ENT>.
Function 34 – Print program
This function prints the individual parameters in all the programs stored in the memory.
When pressing <N> the system will leave the function, without carrying out the function. When
pressing <Y> the system will start printing the parameters in all programs saved.
Function 46 – Language
Value: An integer number.
This version offers a choice of two languages.
1 - English
2 - German
The languages will be active on the display and on the print-outs.