Watson-Marlow PF6 - Manual (Page 8)

INSTRUCTION HANDBOOK
PF6
PF6 IH EN 74-105-022 v1.04.doc Version: 1.04 Page 8 of 30
3 Installation
PF6 must be placed on a stable bedplate, and all electrical connections are on its rear.
1
2 3
Fig. 6 - Connections
The cable with plug (1) is connected to an earthed switch.
The External GO (2) plug is for the connection of a foot switch or for an external starting signal.
The RS-232 (3) plug is for printer connection.
3.1 Dismantling and disposal
Prior to dismantling, it must be observed that all services are disconnected, and fixing to other
equipment is removed.
WM-Flexicon machines may not be disposed using normal refuse collection. The machines must be
collected and disposed separately as they contain electrical components such as batteries, electrolyte
capacitors, liquid crystal displays and printed circuit boards. Further information is available on
www.wmflexicon.dk .