Westermo MDI-112-F4G User Manual
Page 45
41
Popup message screen to show you that have done the command. Click on OK to
close the screen. Then please go to Reboot page to reboot the switch.
Click on OK. The system will then auto reboot the device.
Note: If you already configured the IP of your device to other IP address, when
you use this command by CLI and Web UI, our software will not reset the IP
address to default IP. The system will remain the IP address so that you can still
connect the switch via the network.
4.2.10 System Reboot
System Reboot allows you to reboot the device. Some of the feature changes
require you to reboot the system. Click on Reboot to reboot your device.
Note: Remember to click on Save button to save your settings. Otherwise, the
settings you made will be gone when the switch is powered off.
Pop-up alert screen to request confirmation. Click on Yes. Then the switch will be
rebooted immediately.
Pop-up message screen appears when rebooting the switch..