Westermo MDI-112-F4G - Manual (Page 61)

57
Storm Control
Strom
Control –
Packet Type
Switch(config-if)# storm-control
broadcast Broadcast packets
dlf Destination Lookup Failure
multicast Multicast packets
Storm Control
- Rate
Switch(config-if)# storm-control broadcast
<0-262143> Rate limit value 0~262143 packet/sec
Switch(config-if)# storm-control broadcast 10000
Enables rate limit for Broadcast packets for Port 13.
Switch(config-if)# storm-control multicast 10000
Enables rate limit for Multicast packets for Port 13.
Switch(config-if)# storm-control dlf 10000
Enables rate limit for Destination Lookup Failue packets
for Port 13.
Port Trunking
LACP Switch(config)# lacp group 1 gi8-10
Group 1 based on LACP(802.3ad) is enabled!
Note: The interface list is fa1,fa3-5,gi8-10
Note: different speed port can’t be aggregated together.
Static Trunk Switch(config)# trunk group 2 fa6-7
Trunk group 2 enable ok!
Display - LACP Switch# show lacp internal
LACP group 1 internal information:
LACP Port Admin Oper Port
Port Priority Key Key State
----- ----------- -------- -------- -------
8 1 8 8 0x45
9 1 9 9 0x45
10 1 10 10 0x45
LACP group 2 is inactive
LACP group 3 is inactive
LACP group 4 is inactive