ACTi Bullet Camera (E44~E46) on Tilted Wall with Integrated Bracket User Manual
Page 9
Advertising
![background image](/files/810678/content/doc009.png)
Installation Guide
b.
If necessary, adjust the bracket position and then tighten the lock screw to lock
its position.
3.
Mark and drill the location of the screw holes and cable hole, if necessary.
NOTE:
Depending on the surface where you will install the camera, it may be necessary to
drill three (3) holes and use the supplied screw plugs.
Advertising
This manual is related to the following products: