Trigger digital output, Send audio signal to a camera – ACTi ENR-110 ENR-120 ENR-130 ENR-140 User Manual
Page 42
Advertising
ENR-100 Series User’s Manual
Trigger Digital Output
You can trigger a digital output connected to a camera via remote client interface. Right -click
on the channel and select the DO you want to trigger.
Send Audio Signal to a Camera
If a camera is connected with an audio-out device( e.g. a speaker), you can make use of the
audio-in device ( e.g. a microphone) to send the audio signal to the camera side. To do this,
right-
click on the channel and select ”Audio Out”.
Advertising