Epson 10020 - Manual (Page 137)

2. Turn on or reset the computer. You see the following
Operation menu:
OPERATIONMENU
1 - Setup
2 - Format hard disk
3 - Format diskette
4 - System diagnostics
5 - Prepare hard disk formoving
0 - Exit to DOS for more utilities
Enter selection number:_
This is the menu for the setup and diagnostics programs on
the Reference diskette.
3. Press 1 and Enter to select the set up option. The screen
then displays the main Setup menu:
E x i t
Real-time clock
P r i m a r y s e r i a l p o r t
Secondary serial port
You use and to move the cursor block (the highlighted
bar) through the options on this menu. Once you highlight
the option you want, press Enter to select it.
Note
Make sure the Num Lock function is off when your are
using the Setup program; otherwise the arrow keys do
not work. The Num Lock indicator on the top right
corner of the keyboard is illuminated when Num Lock is
on.
Changing DIP Switches and Using Setup A-7