Epson 10020 User Manual
Page 23
Advertising
5.
Note
If the monitor has the proper type of plug, you can plug
at into the auxiliary power outlet next to the AC power
inlet on the back of the computer.
6.
7.
Plug the other end of the power cord into an electrical
outlet.
If you connected the monitor to the MGA card in the
computer, set the color/mono monitor switch on the card
to match the type of monitor you are using, either color or
monochrome.
The Apex computer is set up to use an 80-column, color
monitor. If you are connecting any other type of monitor,
you need to change two of the DIP switches (1-5 and 1-6)
on the computer’s front panel to match the monitor and
display adapter you are using. See Appendix A for
instructions on changing the DIP switches.
1-6
Sating Up Your System
Advertising