Epson 10020 - Manual (Page 237)

Power,
connecting, 1-10
cord, 1-10
source, 1-4
supply, B-3
Power-on diagnostics, C-1–4
Primary partition, F-2–3
PRINT, 3-14–15
Printer,
connecting, 1-7–8
interface check, D-27–28
options, B-5–6
parallel interface, 1-7–8
problems, 5-12–13
serial interface, 1-9–10,
A-10–12
Processor speed, 2-1–2
R
RAM check, C-3
Read only memory (ROM),
BIOS, B-1
Read/write heads, 2-8
Real-time clock, 1-18–20, A-8
RECOVER, 5-7
Redirecting printer output,
1-9–10
Relative pathname, 3-18–19
RENAME, 3-12–13
RMDIR (RD), 3-25
RESET button, 2-5
Resetting the computer, 2-4–5
ROM BIOS, B-1
Root directory, 3-15–16
S
Sectors, 2-6–7
SELECT, F-4–6
Serial,
cable, 1-9
interface, 1-9–10
port, 1-9–10
port check (RS-232C), D-28–29
port DIP switches, A-5
port loop-back
connector pin
assignments, B-9
port pin assignments, B-10
port, primary, A-4–5, A-10–12
port, secondary, A-4–5, A-10–12
port, settings, A-10–12
Setting up, 1-1–24
Setup menu, A-7
Setup program, A-6–14
real-time clock, A-8–10
serial port settings, A-10–12
Software problems, 5-11–12
Speaker, B-2
Special keys, 2-2–3
Specifications, B-1–9
Speed, changing, 2-1–2
Subdirectories, see Directories
SUBST, 3-21
Switches, command, 3-7
System
board check, D-7–8
device check, C-1–2
diskettes, 1-21, 3-4
T
TIME, 1-20
Time, setting, 1-17–18
Timer and CMOS RAM Check,
C-2
Tracks, 2-6–7
TREE, 3-23–24
Troubleshooting, 5-1–14
Turning off computer, 2-5
Turning on computer, 1-14–15
I n d e x 5