Amer Networks SS2GD8I - Manual (Page 113)

107
set mode
Syntax: set mode <mode>
Description: Sets QoS priority mode of the switch.
Arguments:
<mode>: can be “port” for per port priority, “pri_tag” for VLAN tag priority, “tos” for IP ToS classification,
“layer4” for IP TCP/UDP port classification, or “diffserv” for IP DiffServ classification
Example:
SS2GD8I(qos)# set mode port
set port
Syntax: set port <port range> <class>
Description: Sets the class of ports for on port-based QoS
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<class>: class of service, can be 1 (high) or 0 (low).
Example:
SS2GD8I(qos)# set port 1-8 1
set pri-tag
Syntax: set pri_tag <port-range> <tag-range> <class>
Description: Sets class of ports on VLAN tag-based QoS.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<tag-range>: tag priority level, can be a single level (e.g. “1”) or a range of levels (e.g. “5-7”), range from
0-7.
<class>: class of service, can be 1 (high) or 0 (low).
Example:
SS2GD8I(qos)# set pri-tag 1-7 1-2 1