Amer Networks SS2GD8I - Manual (Page 73)

67
set reAuthEnabled
Syntax: set reAuthEnabled <port-range> <ebl>
Description: A constant that defines whether regular reauthentication will take place on this port or not.
Arguments:
<port range>: which ports are affected, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”),
range from 1-8.
<ebl>: 0 or 1 (disable or enable re-authentication).
Example:
SS2GD8I(802.1X)# set reAuthEnabled 2 1
set reAuthMax
Syntax: set reAuthMax <port-range> <max>
Description: The number of re-authentication attempts that are permitted before the port becomes
Unauthorized.
Arguments:
<port range>: which ports are affected, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”),
range from 1-8.
<max>: number of attempts, range from 1-10, default is 2.
Example:
SS2GD8I(802.1X)# set reAuthMax 2 2
set reAuthPeriod
Syntax: set reAuthPeriod <port-range> <sec>
Description: The number of seconds between re-authenticating the supplicant.
Arguments:
<port range>: which ports are affected, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”),
range from 1-8.
<sec>: timer, range from 1-65535, default is 3600.
Example:
SS2GD8I(802.1X)# set reAuthPeriod 2 3600