Amer Networks SS2GD8I - Manual (Page 87)

81
enable egress-rate
Syntax: enable egress-rate <port range> <data rate>
Description: Sets the egress-rate of a port.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<data rate>: the egress-rate limit in Mbps, range from 0-1000
Example:
SS2GD8I(bandwidth)# enable egress-rate 1-8 200
enable ingress-rate
Syntax: enable ingress-rate <range> <data rate>
Description: Sets the ingress-rate of a port.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<data rate>: the ingress-rate limit in Mbps, range from 0-1000
Example:
SS2GD8I(bandwidth)# enable ingress-rate 1-8 100
enable storm-rate
Syntax: enable storm-rate <range> <data rate>
Description: Sets the storm-rate of a port.
Arguments:
<port range>: which ports to change, can be a single port (e.g. “1”) or a range of ports (e.g. “5-7”), range
from 1-8.
<data rate>: the storm-rate limit in Mbps, range from 0-1000
Example:
SS2GD8I(bandwidth)# enable strom-rate 1-8 150